PTN36241GHX - SuperSpeed USB 3.0 redriver

PTN36241GHX是NXP恩智浦公司的一款信号调节器 - USB 3.0产品，PTN36241GHX是SuperSpeed USB 3.0 redriver，本站介绍了PTN36241GHX的封装应用图解、特点和优点、功能等，并给出了与PTN36241GHX相关的NXP元器件型号供参考。

PTN36241GHX - SuperSpeed USB 3.0 redriver - 信号调节器 - USB 3.0 - 接口与连接性 - 恩智浦

产品描述

PTN36241G is a very small, low power SuperSpeed USB 3.0 redriver IC that enhances signalquality by performing receive equalization on the deteriorated input signal followed bytransmit de-emphasis maximizing system link performance for mobile applications. Withits superior differential signal conditioning and enhancement capability, the devicedelivers significant flexibility and performance scaling for various systems withdifferent PCB trace and cable channel conditions and still benefit from optimum powerconsumption.

PTN36241G is a dual-channel device that supports data signaling rate of 5 Gbit/s througheach channel. The data flow of one channel is facing the USB host, and another channelis facing the USB peripheral or device. Each channel consists of a high-speed Transmit(Tx) differential lane and a high-speed Receive (Rx) differential lane.

PTN36241G has built-in advanced power management capability that enables significantpower savings under various different USB 3.0 Low-power modes (U2/U3). It can detectlink electrical conditions and can dynamically activate/de-activate internal circuitryand logic. The device performs these actions without host software intervention andconserves power.

PTN36241G is powered from a 1.8 V supply and is available in a small X2QFN12 package(1.25 mm × 2.1 mm × 0.35 mm) with 0.4 mm pitch.

产品特性和优势

Supports USB 3.0 specification (SuperSpeed only)
Compliant to SuperSpeed USB 3.0 standard
Support of two channels
Pin out data flow matches USB 3.0 Micro-AB/Micro-B receptacle pin assignments
Two control pins to select optimized signal conditions
- Receive equalization on each channel to recover from InterSymbolInterference (ISI) and high-frequency losses, with provision tochoose equalization gain settings per channel
- Transmit de-emphasis on each channel delivers pre-compensation suitedto channel conditions
- Output swing adjustment
Integrated termination resistors provide impedance matching on both transmit andreceive sides
Automatic receiver termination detection
Low active power: 189 mW/105 mA (typical) for VDD = 1.8 V
Power-saving states:
- 1.8 mW/1 mA (typical) when in U2/U3 states
- 0.9 mW/0.5 mA (typical) when no connection detected
- 3.6 μW/2 μA (typical) when in Deep power-saving state
Excellent differential and common return loss performance
- 14 dB differential and 15 dB common-mode return loss for 10 MHz to1250 MHz
Flow-through pinout to ease PCB layout and minimize crosstalk effects
Hot Plug capable
Power supply: VDD = 1.8 V (typical)
Compliant with JESD 78 Class II
Very thin X2QFN12 package: 1.25 mm × 2.1 mm × 0.35 mm, 0.4 mm pitch
ESD protection exceeds 7000 V HBM per JDS-001-2012 and 1000 V CDM perJESD22-C101
Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
Operating temperature range: -40 °C to 85 °C

产品应用

Smart phones, tablets
Active cables
Notebook/netbook/nettop platforms
Docking stations and AIO platforms
USB 3.0 peripherals such as flat panel display, consumer/storage devices,printers or USB 3.0 capable hubs/repeaters

下面可能是您感兴趣的恩智浦公司信号调节器 - USB 3.0元器件

NXP公司产品现货专家，订购恩智浦公司产品不限最低起订量，NXP恩智浦产品大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球NXP代理商现货货源 - NXP公司（恩智浦）电子元件在线订购