The PCA9410 and PCA9410A are highly efficient 3.0 MHz, 300 mA, step-up DC-to-DC converters.They convert input voltages from 2.5 V to 5.25 V to a fixed output voltage of 5.0 V.

These devices are optimized for battery-powered applications. High efficiency of up to 94% enables an extended battery life in all portable designs. Step-up operation at aswitching frequency of 3 MHz allows using 1 μH inductor or smaller.

• Efficiency up to 94 %
• ±2 % output voltage accuracy at nominal and static conditions
• ±3 % output voltage accuracy over full current, voltage and temperature range
• VIN ≥ VO, (Pass-Through Mode Operation)
• Load disconnect
• Current-mode controller
• Soft start function for limiting inrush current with true load disconnect
• Reverse current, overcurrent and over-temperature protection
• The PCA9410 totally disconnects input to output when disabled
• The PCA9410A connects input to output when disabled
• Wafer-Level Chip-Size Package (WLCSP) with 0.4 mm pitch; allows for the use of asmaller antenna, or for greater signal strength

• Smartphones
• NFC terminals

• 74LVC1G80GS - 单D型触发器；正沿触发器
• 74AUP1G885 - 低功耗双功能门
• PUMB24 - PNP/PNP配电阻晶体管；R1 = 100 kOhm，R2 = 100 kOhm
• BZV90-C68 - 稳压器二极管
• CBT3253PW - Dual 1-of-4 FET multiplexer/demultiplexer
• PMV27UPE - 20 V，P沟道Trench MOSFET
• 74VHC595D - 8位串行输入/串行输出或并行输出移位寄存器，带输出锁存器
• PESD5V0V2BMB - Very low capacitance bidirectional ESD protection diodes
• 74AUP1G98 - 低功耗可配置多功能门
• 2PD601ARW - NPN通用晶体管；50 V，100 mA