The BGU8010 is a Low Noise Amplifier (LNA) for GNSS receiver applications, available ina small plastic 6-pin extremely thin leadless package. The BGU8010 requires oneexternal matching inductor and one external decoupling capacitor.

The BGU8010 adapts itself to the changing environment resulting from co-habitation ofdifferent radio systems in modern cellular handsets. It has been designed for low powerconsumption and optimal performance when jamming signals from co-existing cellulartransmitters are present. At low jamming power levels it delivers 16.1 dB gain at a noisefigure of 0.85 dB. During high jamming power levels, resulting for example from a cellulartransmit burst, it temporarily increases its bias current to improve sensitivity.

• Covers full GNSS L1 band, from 1559 MHz to 1610 MHz
• Noise figure (NF) = 0.85 dB
• Gain = 16.1 dB
• High input 1 dB compression point of -9 dBm
• High out of band IP3i of 3 dBm
• Supply voltage 1.5 V to 3.1 V
• Optimized performance at very low supply current of 3.1 mA
• Power-down mode current consumption < 1 μA
• Integrated temperature stabilized bias for easy design
• Requires only one input matching inductor and one supply decoupling capacitor
• Input and output DC decoupled
• ESD protection on all pins (HBM > 2 kV)
• Integrated matching for the output
• Available in a 6-pins leadless package 1.1 mm x 0.9 mm x 0.47 mm; 0.4 mm pitch:SOT1230
• 180 GHz transit frequency - SiGe:C technology
• Moisture sensitivity level of 1

• LNA for GPS, GLONASS, Galileo and Compass (BeiDou) in smart phones, featurephones, tablets, digital still cameras, digital video cameras, RF front-end modules,complete GNSS modules and personal health applications

• BAS21H - 单个高压开关二极管
• 74LVC823AD - 带5 V容压输入/输出的9位D型触发器；正沿触发器（三态）
• PBLS6023D - 60 V，1.5 A PNP BISS负载开关
• PEMH11; PUMH11 - NPN/NPN配电阻晶体管；R1 = 10 kΩ，R2 = 10 k?
• BZX884-C10 - 稳压器二极管
• BZX79-C3V9 - 稳压器二极管
• BZT52H-C9V1 - 采用SOD123F封装的单倍齐纳二极管
• BAT54AW - 肖特基势垒二极管
• P5CN081UA - 安全双接口和接触式PKI智能卡控制器
• 74AVC2T45 - 双位双电源电压电平转换器/收发器；3态