PCA9846PW - 4-channel ultra-low voltage, Fm+ I2C-bus switch with reset

PCA9846PW是NXP恩智浦公司的一款I²C增强快速模式产品，PCA9846PW是4-channel ultra-low voltage, Fm+ I2C-bus switch with reset，本站介绍了PCA9846PW的封装应用图解、特点和优点、功能等，并给出了与PCA9846PW相关的NXP元器件型号供参考。

PCA9846PW - 4-channel ultra-low voltage, Fm+ I2C-bus switch with reset - I²C增强快速模式 - I²C - 恩智浦

产品描述

The PCA9846 is an ultra-low voltage, quad bidirectional translating switch controlled via theI2C-bus. The SCL/SDA upstream pair fans out to four downstream pairs, orchannels. Any or all SCx/SDx channels can be selected, determined by the programmablecontrol register. This feature allows multiple devices with the same I2C-busaddress to reside on the same bus. The switch device can also separate a heavily loadedI2C-bus into separate bus segments, eliminating the need for a busbuffer.

An active LOW reset input allows the PCA9846 to recover from a situation where one of thedownstream I2C-buses is stuck in a LOW state. Pulling the RESET pin LOW resets the I2C-bus state machineand deselects all the channels, as does the internal Power-On Reset (POR) function.

The pass gates of the switches are constructed such that the VDD1 pin is usedto limit the maximum high voltage which is passed by the PCA9846. This allows the use ofdifferent bus voltages on each channel, so that 0.8 V, 1.8 V, 2.5 V or 3.3 V parts cancommunicate without any additional protection. External pull-up resistors pull the busup to the desired voltage level for each channel. All I/O pins are 3.6 V tolerant.

产品特性和优势

Ultra-low voltage operation, down to 0.8 V to interface with next-generation CPUs
1-of-4 bidirectional translating switch
Fm+ I2C-bus interface logic; compatible with SMBus standards
2 address pins allowing up to 16 devices on the I2C-bus
Channel selection via I2C-bus
Power-up with all switch channels deselected
Low Ron switches
Allows voltage level translation between 0.8 V, 1.8 V, 2.5 V and 3.3 V buses
Reset via I2C-bus software command
I2C Device ID function
No glitch on power-up
Supports hot insertion since all channels are de-selected at power-on
Low standby current
3.6 V tolerant inputs
0 Hz to 1 MHz clock frequency
ESD protection exceeds 6000 V HBM per JESD22-A114 and 1000 V CDM perJESD22-C101
Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
Two packages offered: TSSOP16 and HVQFN16

下面可能是您感兴趣的恩智浦公司I²C增强快速模式元器件

NXP公司产品现货专家，订购恩智浦公司产品不限最低起订量，NXP恩智浦产品大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球NXP代理商现货货源 - NXP公司（恩智浦）电子元件在线订购