

- MPXH6400AC6T1 - 压力传感器、变送器
- MMA6855LKCWR2 - 运动传感器 - 加速计
- N74F175AD,623 - 集成电路(IC) > 逻辑 > 触发器
- PMBF4392,215 - 分立半导体产品 > 晶体管 > JFET
- MPXV7002DP - 压力传感器、变送器
- 74HC58DB,118 - 集成电路(IC) > 逻辑 > 门和反相器 - 多功能,可配置
- CGD1044H,112 - 集成电路(IC) > 线性 > 放大器 > 视频放大器和模块
- MCIMX257CVM4 - 集成电路(IC) > 嵌入式 > 微处理器
- S32K366EHT1MJBSR - 集成电路(IC) > 嵌入式 > 微控制器
- LD6806F/20H,115 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- PCA9634BS,118 - 集成电路(IC) > 电源管理(PMIC) > LED 驱动器
- MC34VR5100A1EPR2 - 集成电路(IC) > 电源管理(PMIC) > 电源管理 - 专用
- LD6815TD/21P,125 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- PCF85176T/1,118 - 集成电路(IC) > 电源管理(PMIC) > 显示驱动器
- TDA8754HL/21/C1,51 - 集成电路(IC) > 数据采集 > ADC/DAC - 特殊用途
- MC33397DW - 集成电路(IC) > 电源管理(PMIC) > 配电开关,负载驱动器
- FS32K146HAT0MLHR - 集成电路(IC) > 嵌入式 > 微控制器
- MC68HC916P1VAA16 - 集成电路(IC) > 嵌入式 > 微控制器
- 74LV153PW,118 - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- MPX5010D - 传感器,变送器 > 压力传感器、变送器



NX5P2553GV - Precision adjustable current-limited power switch
NX5P2553GV是NXP恩智浦公司的一款负载开关产品,NX5P2553GV是Precision adjustable current-limited power switch,本站介绍了NX5P2553GV的封装应用图解、特点和优点、功能等,并给出了与NX5P2553GV相关的NXP元器件型号供参考。
NX5P2553GV - Precision adjustable current-limited power switch - 负载开关 - 逻辑 - 恩智浦
The NX5P2553 is a precision adjustable current-limited powerswitch. The device includes under voltage lockout, over-current, over-temperature, andreverse bias protection circuits designed to automatically isolate the switch terminalswhen a fault condition occurs. The device features two power switch terminals, one input(VIN) and one output (VOUT); a current limit input (ILIM) for defining the over-currentlimit; an open-drain fault output (FAULT) to indicate whena fault condition has occurred and an enable input (EN) to control the state of theswitch.
The over-current limit threshold can be programmed to between 85 mA and 1.8 A using anexternal resistor between the ILIM and GND pins. The device has built in soft start.This feature controls the output rise time, minimizing current surges when the switch isenabled.
Designed for operation from 2.5 V to 5.5 V, it is used in power domain isolationapplications to protect from out of range operation. The enable input includesintegrated logic level translation making the device compatible with lower voltageprocessors and controllers.
- Wide supply voltage range from 2.5 V to 5.5 V
- ISW maximum 1.5 A continuous current
- ± 6% current-limit accuracy at 1.8 A (typical)
- Meets USB current-limiting requirements
- Adjustable current limit from 85 mA to 1800 mA (typical)
- Constant current mode in over-current situation
- Over-temperature protection
- Very low ON resistance: 95 mΩ (typical) for TSOP6 package
- Fast short-circuit switch-off response (2.0 μs typical)
- ILIM short detection
- Reverse input-output voltage protection
- Built-in soft-start
- ESD protection:
- HBM ANSI/ESDA/JEDEC JS-001-2012 Class 2 exceeds 2000 V
- CDM JESD22-C101D exceeds 500 V
- IEC61000-4-2 contact discharge exceeds 8 kV for VOUT (with externalcapacitance)
- Specified from -40 °C to +85 °C ambient temperature
- USB port/hubs
- Digital TV and set-top boxes
- VOIP phones
- BFU530W - NPN宽带硅RF晶体管
- NZX30X - 单倍齐纳二极管
- PN5180 - High-power NFC frontend solution
- 74HCT1G126GW - 总线缓冲器/线路驱动器;3态
- 74HCT595D - 8位串行输入、串行或并行输出移位寄存器,带输出锁存器 ;3态
- BF510 - N沟道硅FET
- BUK7606-55B - N沟道TrenchMOS标准电平FET
- 74HC(T)1G00 - 2输入与非门
- 74AUP1GU04GX - 低功耗非缓冲反相器
- PESD5V0X2UM - 超低电容单向双ESD保护二极管



