
- HSDC-EXTMOD01/DB - 开发板,套件,编程器 > 开发板,编程器配件
- MK40DN512ZVMD10 - 集成电路(IC) > 嵌入式 > 微控制器
- SPC5643LF2MLQ8R - 集成电路(IC) > 嵌入式 > 微控制器
- MMA5224AKW - 运动传感器 - 加速计
- PZU2.4B,115 - 分立半导体产品 > 二极管 > 齐纳 > 单齐纳二极管
- MC33879APEKR2 - 集成电路(IC) > 电源管理(PMIC) > 配电开关,负载驱动器
- 74AUP1G126GW,125 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- MKL03Z8VFG4R - 集成电路(IC) > 嵌入式 > 微控制器
- KMPC8349EZUAJDB - 集成电路(IC) > 嵌入式 > 微处理器
- BFR106,215 - 分立半导体产品 > 晶体管 > 双极(BJT) > 双极射频晶体管
- MC9S12XDT256VAG - 集成电路(IC) > 嵌入式 > 微控制器
- MC9S12XEQ384VAG - 集成电路(IC) > 嵌入式 > 微控制器
- BZX84-C6V2,235 - 分立半导体产品 > 二极管 > 齐纳 > 单齐纳二极管
- MVF50NN151CMK50 - 集成电路(IC) > 嵌入式 > 微处理器
- PCA9535D,112 - 集成电路(IC) > 接口 > I/O 扩展器
- BZX384-B3V0,115 - 分立半导体产品 > 二极管 > 齐纳 > 单齐纳二极管
- BATT-TPLCABLE50 - 开发板,套件,编程器 > 开发板,编程器配件
- TJA1462ATK/S3J - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- LS1012ASE7EKA - 集成电路(IC) > 嵌入式 > 微处理器
- MC33591FTAER2 - 射频和无线 > 射频接收器



NX5P2190UK - Logic controlled high-side power switch
NX5P2190UK是NXP恩智浦公司的一款负载开关产品,NX5P2190UK是Logic controlled high-side power switch,本站介绍了NX5P2190UK的封装应用图解、特点和优点、功能等,并给出了与NX5P2190UK相关的NXP元器件型号供参考。
NX5P2190UK - Logic controlled high-side power switch - 负载开关 - 逻辑 - 恩智浦
The NX5P2190 is an advanced power switch with adjustable current limit. It includesunder-voltage and over-voltage lockout, over-current, over-temperature, reverse bias andin-rush current protection circuits. These circuits are designed to isolate a voltage sourcefrom a VBUS interface pin automatically when a fault occurs. The device features twopower switch terminals, one input (VINT) and one output (VBUS). A current limit input(ILIM) defines the over-current and in-rush current limit, and a voltage detect output(VDET) monitors the voltage level on VBUS. An open-drain fault output (FAULT) indicateswhen a fault condition occurs. An enable input (EN) controls the state of the switch. WhenEN is set LOW the device enters a low-power mode, disabling all protection circuitsexcept the under-voltage lockout. The low-power mode can be entered at anytime unlessthe over temperature protection circuit has been triggered.
Designed for operation from 3 V to 5.5 V, the NX5P2190 is a complete solution for powerdomain isolation and protection applications. The enable input includes integrated logiclevel translation making the device compatible with lower voltage processors andcontrollers.
- Wide supply voltage range from 3 V to 5.5 V
- 30 V tolerant on VBUS
- ISW maximum 2 A continuous current
- Very low ON resistance: 100 mΩ (maximum) at a supply voltage of 4.0 V
- Low-power mode (ground current 20 μA typical)
- 1.8 V control logic
- Soft start turn-on slew rate
- Protection circuitry
- Over-temperature protection
- Over-current protection with low current output mode
- Reverse bias current/Back drive protection
- Over-voltage lockout
- Under-voltage lockout
- Analog voltage limited VBUS monitor path
- ESD protection:
- HBM JDS-001 Class 2 exceeds 2 kV
- IEC61000-4-2 contact discharge exceeds 8 kV for pins VBUS
- Specified from ?40 °C to +85 °C
- USB OTG applications
- PCA9633BS - 4位Fm+ I2C总线LED驱动器
- 74LVC1G06GN - 反相器,带开漏输出
- PCA9564 - 并行总线至I2C总线控制器
- TDZ3V9J - 单倍齐纳二极管
- TEA1703TS - 实现极低待机功耗的副边侧控制器
- 74HCT4075DB - 三路3输入或门
- PEMB4 - PNP/PNP配电阻晶体管;R1 = 10 kOhm,R2 = 开路
- 74AHCT257D - 四路2输入多路复用器;3态
- 74LVC1G66GF - 双向开关
- 74HCT85DB - 4位量值比较器



